Not a fan of the article. It resorts to ad hominem attacks like
> GA had gotten a bad reputation because of its tendency to attract bad mathematicians and full-on crackpots. Hestenes honestly sounds like one a lot of the time, and I’m not really sure whether he is or isn’t. It makes sense, really.
> GA ended up appealing to a lot of fringes: people who only had undergraduate degrees, people who had dropped out of PhDs, people with PhDs from unrigorous programs, people who had been good at math but were perhaps going a bit senile, random passerbies from engineering or computer programming, run-of-the-mill circle-squarers, people who had a bone to pick with establishment mathematics and felt like all dissenting views were being unfairly suppressed
> It didn’t help that a lot of the texts by the actually-competent GA people, like the Cambridge group, tended to say things that sounded and still sound kind of crackpotty as well.
After reading the article, the main "case against geometric algebra" I could find in there was that the author does not like the people using/doing research in geometric algebra, such as the ostensibly failed academics from a Cambridge research group [1] which the article links to.
I was expecting in the "An Actual Case Against GA" section that the author would demonstrate something like "Geometric Product actually does not work if you apply it to xyz domain". Rather, the section just ended up being mostly about the type of bikeshedding you see about naming of variables in programming.
There is I guess merit to the core "there is no good general interpretation or usage for the geometric product or mixed-grade multivectors" thesis of the article but calling other academics crackpots really subtracts from that message.
Those paragraphs are in the background section, clearly labeled as "this is what other people think", and are followed with a high effort explanation of (presumably) the substance of the theory and why the author considers some of their ideas to be good and others to just increase the confusion.
The technical arguments are less like variable naming discussions and more like arguments against teaching logic circuit design with only nand (without naming the and/or/not operators) or using untyped lamba calculus (with Church numerals, e.g. `3 := λf.λx.f (f (f x))`) to do calculations on numbers.
At the least, the five bolded statements summarizing 5 of the 7 highly technical arguments should count as substantial claims.
Of course, having learned of the subject only from the author, it's hard to know whether it's a good representation of GA or a strawman, but the theory that he teaches as GA indeed seems quite flawed as a tool for thought.
Only tangenially relevant, but the exagerrated differentiation of universities, and levels of education (e.g. PhD vs. not) has always been bothering me. I only have experience in a different field (CS), and yes, those things can be indicators, but I've experienced so many outliers in both directions to know that degrees need to be taken with more than just a grain of salt.
This differentiation is amplified in (pure) mathematics, where two different subfields can have essentially zero overlap*, making peer review and general QA difficult to scale.
* Physical sciences also have a lot of diversity, but at least you can go to their labs and see their equipment, reagents, data, etc cetera.
Yes, this is essentially because mathematics is such an old science and goes very deep into branches. That's btw also why getting a certain degree is much harder there than in any other fields I've seen (did a bunch of courses at university in various fields, and the diff between e.g. pure math and psychology is almost comical).
I meant it more as an assessment of the state of affairs, not as an ad hominem (I have no opinion about the people at all). IMO the crackpottery is impossible to ignore, and if you don't talk about it everyone feels like they're going crazy. It's a very widely-noticed thing that is distinct and bizarre compared to other parts of math.
Crackpot really has connotations like "flat earther" and "aliens built the pyramids". It's one thing to say "I believe GA proponents' claims regarding the usefulness of the geometric product are overstated". It's another to say "GA proponents are crackpots".
Well, I said "sound kind of crackpotty", not "are crackpots", about the reputable writers. My point (ish) is that I would really like it if the non-crackpot GA writers would try a lot harder not to sound like crackpots! It is a real issue. I've never seen writing in any other field of math which so frequently strays into sounding unhinged. (Referring mostly to Hestenes + the Cambridge group here.)
Can do either! If your multivectors represent linear transformations then their products will also be linear transformations. If they're affine transformations then their products will be affine transformations. Euclidean, conformal, etc!
especially the part about duals -- made me feel like I was going crazy when I was trying to figure out degenerate metrics: every source deals with it in a slightly different (often sloppy) way; you're sure it all must be possible to resolve and get something beautiful and consistent, but not while you're trying to apply it to a specific problem you need to solve
It does starts to sound a bit like chortling about what a weird asshole Semmelweis is. ISTR to recall that US students of linguistics were slow to adopt the International Phonetic Alphabet because it North America it had become associated with elocutionists, and no proper academic linguist wanted to look like an elocutionist grubby.
> After reading the article, the main "case against geometric algebra" I could find in there was that the author does not like the people using/doing research in geometric algebra
Mathematics is a social activity. The research cultures of different branches matter.
How is the geometric product any less motivated than any other notation? Ultimately the value of a notation is how easy it makes it to work and think. I'm not sure if GA achieves that or not, but what's the harm in trying a new approach?
AFAIK nobody is proposing to replace all of geometry with GA, only 3+1 spacetime.
Author doesn't argue against the idea of choosing a new notation, he makes very detailed arguments about why this specific new notation is clumsy to work with.
Yes but my point is that their argument is undermined by the extreme clumsiness of standard mathematical physics notation. I don't believe GA is the best possible notation for physics but it could be a stepping stone. We need more people who explore such things rather than more people who call each other crackpots.
From a mathematician's point of view, yes, you should write the Maxwell field equations, at least to see it once, that way because you're showing a very low-level symmetry that even the differential forms approach doesn't get all the way to. Differential forms is a standard approach for general relativity, e.g. MTW.
I guess the people pushing this are a little pushy, but this reminds me of the whole pie fight over the Rust community. OK, so they're pushy. Nothing to do with the merits or demerits of the language (or of C for that matter).
If you're a baby duck about linear algebra and geometry, there's no need to care about different formalisms. Do whatever works. But it's interesting to see how all of this stuff comes together at different levels, whether it's the geometric product, differential forms, or just linear algebra.
> From a mathematician's point of view, yes, you should write the Maxwell field equations, at least to see it once, that way because you're showing a very low-level symmetry that even the differential forms approach doesn't get all the way to. Differential forms is a standard approach for general relativity, e.g. MTW.
While it's neat to write them all as one equation, I disagree that it's an enlightening perspective to learn. While it seems like writing Maxwell's equations in one equation instead of two is a step forward with even more symmetry, what is actually going on is that you are obscuring the most important part of Maxwell's equations: the gauge structure. Without this, it actually becomes much more hidden just how geometric electromagnetism is.
When you write Maxwell's equations as the pair `dF = 0`, `d*F = J`, the first of those two equations is exactly what tells you that this is a gauge theory, and thus may write `F = dA` where `A` is a vector potential. This vector potential then becomes the connection which defines a covariant derivative in a fibre bundle, and one then sees that charged particles follow geodesics now in spacetime, but in an enclosing fibre bundle. This is foundationally important to modern physics, and IMO obscured by writing Maxwell's equations as `∇F = J`
____
n.b. I'm not a particularly big fan of differential forms either, I think it leaves a lot to be desired, and it's super awkward to constantly have to pull out Hodge Duals every time you want to do something that involves the metric, but I'm also unconvinced that geometric algebra is the answer here.
What interests a mathematician isn't 100% the same as what interests the physicist. All I'm saying is there is some math there that's interesting and people should see it once for the math.
And then there are us engineers. I don't care much either way whether Maxwell's equations are ∇F = J or some other form, as long as it makes the problem easier to solve.
If I were in the GA Marketing Committee I'd publish a paper with suitably hand-picked worked examples where the vector approach is long and tedious, and GA version is short and sweet.
I like this idea but I get the sinking feeling GA proponents don't really solve problems with GA. Like how Haskell advocates don't write programs and modular synth enthusiasts don't write music.
Application of the Method of Moments to solve full wave formulation of Maxwell's equations. To derive the EFIE using maxwell's equations is a massive pain. With geometric algebra, all you need is ∇F = J and the MoM becomes a mechanical process.
I guess I'd say my point though is that the gauge structure is the mathematically interesting part of Maxwell's equations. (i.e. the fact that `F` is a closed differential form).
Without it, I think it'd be of significantly less mathematical interest because it'd lose almost all of its geometric properties.
There isn't just ONE interesting facet of this. There isn't just ONE mathematical formalism of a lot of these things. GA is just one of those approaches and you should see it just once, just like you should see the group structure and all of that as well. For most applications, the standard vector calculus approach is fine. But the math underlying all of this is full of richness and no one approach is the skeleton key.
Same with programming languages. Some people are like RUST RUST RUST and some are like C C C! I'm like, you guys only use one language?
> pull out Hodge Duals every time you want to do something that involves the metric, but I'm also unconvinced that geometric algebra is the answer here.
I don't know, I recently tried to work out how the metric on vectors/1-forms induces a metric on higher-degree forms, and if the geometric product magically gives this for free I'd say it's a win (same for the Hodge star).
agreed, when you start needing the the hodge star, diff form loose quite a lot of their interest.
i'd add it's quite nice in string theories for RR fields and coupling to D-branes, where writing 10 anti-symmetrized indices quickly gets annoying.. and topological field theories..
Note that by introducing the co-differential δ, you can write the Maxwell equations as a single expression (δ + d)F = J in the differential forms approach.
However, from the perspective of Yang-Mills theory, that's rather questionable as you're stitching together the Bianchi identity and the Yang-Mills equation for no particular reason.
The space time approach with E as t wedge x and B as x wedge y is purely linear algebra, not differential forms.
As opposed to the weird GA form it actually makes the physically most meaningful symmetry (Lorentz transformations) explicit. That's why it's actually used in Physics.
Anti symmetric space time tensors are the absolute standard. Further formulations that reveal other aspects, dualities, symmetries are much more niche and specialized subjects and not how the subject should be taught when first encountering it.
Is this really a big debate? I am in the similarly-named (but apparently distant) field of algebraic geometry and have never even heard of geometric algebra. Certainly I know about Clifford and exterior algebras, but this debate has never reached me.
I tried to solve some engineering problems with PGA few years ago. Seemed to work OK up to a point, and at least for me was easier to approach than say Lie algebra or differential geometry.
TFA denigrates papers and websites that are "non-theoretical" or "trivial". As a user of the formalisms, these kinds of materials are exactly what I need. I don't care about proofs or theoretically problematic corner cases that "real mathematics" seems to be almost exclusively interested in.
I did hit a wall quite soon with GA, and got a feel that it may indeed be overhyped, but at least the scene seems to be interested about applied use.
There seems to be similar debate about nonstandard calculus. For my modest use it has provided some tools that can give me results that I don't know how to get with epsilon-delta etc. I don't really care if I don't "really understand" it because the underlying proofs need some heavy machinery. I don't understand those for standard calculus either, and in applied use you either manipulate infinitesimals without any proper algebra, or just hope what you need is in some table.
I can't comment on deeper theoretical or philosophical questions about these, and I don't really care about them. But to me maths communication often seems analogous to making people learn turing machines and lambda calculus before they are allowed to program in Javascript.
I don't think the author necessarily disagrees with me much, but this is maybe a kinda mini rant from a perspective of someone who is just an "end user" of mathematics.
I don't recall the details anymore, and the work never amounted to anything, but generally it was about finding expressions for some properties of the visual flow field under curvilinear motion.
I can't really say if the problem was with me or GA. Probably more like GA didn't end up providing tools for my level of math skills to solve the problem. But neither did the the traditional branches.
> I don't care about proofs or theoretically problematic corner cases that "real mathematics" seems to be almost exclusively interested in.
That is a rather strange take for a software engineer.
When implementing something I do need to know what the corner cases are, whether the runtime can enter such a state. I need to think how to put in checks so that they cannot be reached, or alternatively, how to recover gracefully. That's my job after all, why would anyone pay me if I didn't.
Perhaps a topical example is a gimbal lock. I need to be aware that it can happen and I need to know how to prevent it.
I didn't mean corner cases like that. I mean stuff that has no practical consequences, at least for most practical use.
E.g. whether or not Navier-Stokes can form singularities doesn't really change how you analyze fluid dynamics in engineering. This doesn't mean it is not a mathematically important question worth extensive study, but it's not relevant for practitioners.
This article captures so much of what I have felt but been unable to put into words about GA. I come from a computational physics background, and when translating theory into numerical algorithms, the dimensional analysis and units are very important (you have to be able to relate the simulation to something in the real world!). GA dispenses entirely with any notion of meaningful units, making the dimensional analysis and error checking extremely difficult. The geometric product has always seemed like some strange mathematical trick or coincidence that happens to maybe have some useful properties. Almost like how "new math" is perhaps easier to learn or understand at first, but you really just need to sit down and understand algorithmically what is going on with the basic arithmetic operations.
100 percent agree with the article. Wedge products are fundamental, GA is weird ideology.
I had the bad fortune of reviewing some GA research articles once upon a time. It was almost embarrassing. Everything of substance had been published in a conceptually cleaner bivector language previously. The only "contribution" was writing everything in terms of weirder, more convoluted concepts that contributed neither technical clarity nor conceptual parsimony.,
Do you by chance have references to those conceptually cleaner bivector publications? I've spent a good bit of time looking for other people working in that space, and haven't found much other than an article by Jancewicz from 1980. (I like to imagine that my articles these past few years have been "conceptually clean", but they certainly aren't "previous" to much GA work.)
My feeling on geometric algebra is that you should look too much into it until you exhaust the exterior algebra. That is (in my opinion): it isn't a good use of it to replace the cross product or specialized representations of 3-d geometric rotations. It is good for when you get a bit sick of the bookkeeping of the exterior algebra. From a computer scientist point of view it is sort of adding a bit of type information beyond just vector dimension and depth of product.
META: Pulling this out of its original context because I think more readers would find the code amusing. I am breaking the rules, but hopefully for a good/pardonable reason.
> Most of the time we think of complex numbers as vectors in R2 or as rotation+scaling operators, but rarely do we actually we want them in both roles at the same time.
I can give one counterexample.
I was asked to comment on a piece of code that did 2D geometry in Python. There was one piece that was a tangle of trigonometry to find the angular bisector of an angle subtended at the origin by two points.
Using the fact that points can be represented by complex numbers and that rotation is just multiplication one can make that function into a one liner.
√(z1 * z2)
The geometric mean of the two points as represented by complex numbers gives you the bisector. Python has native support for complex numbers so all the computation is handled by the runtime.
This is like how one often wants to distinguish the points of an affine space from the vectors representing displacements in that space (there is no distinguished origin for the physical world, but there is a distinguished concept of zero displacement). One can add a vector to a point to get a point, or a vector to a vector to get a vector, but cannot add a point to a point to get another point. Yet, it is meaningful to treat a linear combination of points in an affine space as yielding another point in the same space when the weights of the linear combination sum to 1.
The exact same thing is happening here, only multiplicatively, where z1^(1/2) * z2^(1/2) is a combination with two weights of 1/2 (thus, summing to 1). It is geometrically meaningful to treat 2d vectors (displacements in a plane) as complex numbers, raise them to exponents summing to 1, and then multiply these together to get another vector in the same plane. But it is not generally geometrically meaningful to just multiply one vector by another vector to get a third vector in the same space (because this would require distinguishing some particular direction and magnitude as "1").
I agree with you on three dimensional vector products. It's too special, too cute and doesn't generalize to all dimensions, and as you said, you have to keep track of the two types of vectors.
On complex multiplications though, I disagree. It's a great way to do Euclidean manipulations on the 2d plane. Rotations, translations and reflections (via conjugates) are simple. You rarely need calls to trigonometric functions.
If you have runtime support, it's sorta criminal not to use complex multiplication when applicable.
BTW there is another, equivalent, way of deriving the solution which to me seems more intuitive (and not limited to sum of powers to 1):
The angular travel from z1 to z2 is
z2 / z1.
I want to travel half of that, so
√(z2/z1).
This half travel I apply to z1 like so
√(z2/z1) * z1
done.
If the need was to continue to travel angularly (rotate) beyond z2, say double the subtended angle, that's easy too. No need for the constraint the sum of powers be 1.
There was only the need for the point on the bisector (on the unit circle). There was no need for the magnitude of the angle.
The only thing that needed care was which sign of the sqrt bisects the internal angle as opposed to the external angle.
In general I prefer not to deal with angles when dealing with 2D rotation. Get inputs in angles if need be and from then onwards use the (cos,sin) tuple or, equivalently, use complex numbers. One can get rid of calls to trascendentals as long as you are happy to call sqrt.
if they're unit vectors then yes that makes a lot of sense.
The same calculation works in R^n, incidentally, using the geometric product. This is pretty much the ideal usecase for it, for constructing operators between vectors.
from a theoretical physicist point of view, i find GA don't add much to the standard tooling ppl use, i.e. Lie algebras, Clifford and (sometimes) differential forms. while it's always nice to have a formalism that "hides indices", in most cases (for (super-)gravitation at least) just writing tensor/clifford/lie indices is just much faster and less error prone.
i used to use differential form for gauge theories, einstein-cartan gravitation and ramond-ramond fields.
also, in a paper, we used O(D,D) clifford algebras/spinors to represent differential forms, which worked quite well in our very specific case (appendix A)
> That part is fine. But why, then, does multiplying zzˉ give a “magnitude” that works in a reasonable way?
Because the product of all Galois conjugates is a norm and the determinant of the linear operator defined by general field multiplication of a primitive element when viewing the field extension as a vector space of the extension field over the base field.
Although the geometric interpretation of norms in Galois theory really only works for the complex numbers because only the complex numbers are a field. Quaternions are not a field.
With my limited knowledge, I read through it stumbling along, and from what I gather, this GA is not Clifford Algebra, and the argument is that the GA movement itself is misguided, and that combining operators and geometric objects without distinguishing between them is problematic.
From a programmer's perspective, it seems like they're saying it's a flawed abstraction, while the GA stance is different. I'd like to hear the other side of the argument too. I'm sure HN will get a long GA comment thread, so from their standpoint, what would it feel like? I agree that merging objects and operators is problematic, but I'm curious what the GA camp would say
Reading this article, I think there are quite a few interesting points to consider further. C started as a DSL for the Unix kernel. JavaScript is also a DSL, and successful languages are often described as DSLs in certain respects. Then, as they grow and gain broader adoption, they evolve into general purpose languages.
But if you think about it the other way around, since all programs are ultimately about data transformation, you could argue that UIs should essentially be drawn in SQL, but that would sound strange. That's because the tools we use have moved away from that mental model. (Though React's FRP premise does lean in that direction.)
And when I think about why languages split apart, it seems to me that it's because the word 'programming' covers so many different things at once. Languages end up diverging because they serve different purposes. In fact, as a programmer, I see programming languages as a collection of tools that essentially decide what to give up. C gives you safety and low-level hardware access through its ABI. Python gives you expressiveness. They exist because their target goals are fundamentally different.
In that sense, though I'm not an expert in this field, from my limited perspective this debate feels like it's just the noise that arises when Algebra tries to encompass too much and inevitably splits apart. I imagine these kinds of cases will only increase in the future. As things become more specialized, there will be more situations where existing frameworks don't fit, and new systems will be needed. Is there a term for this phenomenon? At that point, we might say we need to change the old system to fit the new one.
Personally, I wonder if there isn't a general purpose language at the bottom that models the entire world, with other languages layered on top of it.
> As I see it, GA is not so much a subject as an ideological position, consisting of basically two ideological claims about the world:
> Claim 1: That the concepts of EA (so, wedge products, multivectors, duality, contraction) are incredibly powerful and ought to be used everywhere, starting at a much lower level of math pedagogy—basically rewriting classical linear algebra and vector calculus.
I support this claim, so I suppose I’m a proponent of geometric algebra.
I think it’s more or less been carried out for vector calculus by Spivak’s “classical” Calculus on Manifolds, which is somewhat widely taught.
> Claim 2: That the Geometric Product (henceforth: GP) should be added to that list as the most fundamental operation, where by “fundamental” I mean that other operations should be constructed in terms of it, and theorems should be stated using it.
Like the author, I also believe this claim is nonsense.
“Rewriting classical linear algebra” is a honored pastime but it’s very difficult to make any headway doing it—the classical texts are classical for a reason, we more or less know how to teach them as an “80% solution” and it’s unclear that the investment in a new pedagogy would get us to an “81% solution.”
Especially with today’s undergrads. If you’re not churning arithmetic, they’re not into it.
I get why it is interesting and useful to write complex numbers in '+' notation rather than the conventional way to denote a 2d vector, like a tuple of components.
The benefit is that multiplication and distributive property is a beauty in the '+' notation, no special rules need to be memorized for multiplying 2d vectors, i*i = -1 takes care of it.
On the other hand I never understood what the benefit, of writing the tuple of wedge and dot products in '+'notation, is.
Perhaps I am not being fair, that it is the same idea and I have not used it as much as I have used complex numbers.
More or less agreed. I think though that one reason the geometric product is so tempting is that if you take matrix representations of all of these objects, then the geometric product is literally just straightforward matrix multiplication.
Because of that, it just becomes so tempting to try and phrase everything you can in terms of this geometric product. I'm very sympathetic to the temptation, and I even think the geometric product has some great uses (it shows up a lot in some physics I do), and using it makes writing rotations a treat, but I think it's still vastly overemphasized by GA people.
I still don't really know what my favoured notation for differential geometry is, I find myself switching around so much.
Interesting. To summarize your argument: the current state of Algebra is like an 80 point solution, but to push it a few points higher requires an enormous cognitive load, and the question is whether that's really worth it, even from an educational perspective. As mentioned in another comment, this is exactly the kind of issue that comes up in Rust discussions. It seems the argument from the GA camp is that top tier mathematicians are already using these tools just fine without needing to talk about it in that way, so there's no reason for it to become general purpose. Thank you for explaining it in a way that's easy to understand. But on the other hand, maybe anomalies like these could actually become generally useful concepts. Thanks for the comment. upvoted!
As someone who studies physics and then went into a long IT career (but kept reading papers casually), my view is that this whole GA saga is very reminiscent of how after decades of experience, I still can't convince juniors of the benefits of what I now consider obvious best practices. No amount of demonstrations of the blindingly obvious improvement of some better technique seems to work on someone who "finally got the thing to work".[1]
Certain kinds of perfect correctness are like pure and shining crystallised bits of refined knowledge created by the greatest wizards. "Parse, don't validate" or "Make invalid states unrepresentable." ought to be familiar to the better programmers here, the ones with decades of experience built on iterative, collaborative foundations with real consequences for error.
Theoretical physics doesn't have those same consequences, because there is no real punishment for their equivalent of "spaghetti code". Perversely, there's cachet to be gained for gaining understanding of its unnecessarily esoteric knowledge, much like how biologists and lawyers spend half a decade or more studying... Latin.[2]
Introducing Geometric Algebra to physics is like that wizard coder who sweeps away reams of spaghetti code and replaces it all with a call to a single standard library function. It's that "cheff's kiss" of cleanup. Meanwhile the juniors are screaming about how the senior "deleted all their hard work!"
Meanwhile, I never understood where Pauli and Dirac matrices came from! It's like they were pulled from fat air.
You've seen this in code, I bet. Some junior worked really hard on solving a problem and wrote a solid screen-filling wall of "a && b || c || !d && e && (f || g)..." continuing up to "ba, bc, bd", etc.. as they ran out single letters until they're well into the alphabet in double-character symbols.[3]
That's what those matrices are. Someone's hacky attempt at "making things work".
The problem is that we gave those people Nobel prizes and told everyone they're geniuses.
They are, but they were like that brilliant junior. Brilliant.. but junior.
Geometric Algebra sweeps all of that into one beautiful, consistent, crystal clear abstraction that is widely applicable. The magic matrix constants vanish. Bugs in 100-year-old textbook formulas suddenly come to light. Dozens of formulas, one set for each of the 1D, 2D, 3D, and 4D cases collapse into a single formula valid for any number of dimensions.
It's like watching someone struggle with "catching every possible instance of JavaScript injection".
No son, no. Just no. Stop enumerating badness. Stop. Just stop. Escape everything at the boundary instead, enforced by the type system. You'll thank me later.
I know it might be obvious to you, and you always use properly parameterised SQL queries or whatever. This is not the norm everywhere! I still get arguments, long drawn out arguments from people convinced that this is unnecessary and just one more search & replace is all they need to be safe from the bad hackers.
Physicists (and mathematicians) are still making that argument against GA.
"It's isomorphic!"
"That isn't the point!"
[1] You can't convince someone to climb Everest if they struggled to hike up to the top of one of its foothills.
[2] Let me be crystal clear: They're spending their precious time on this Earth learning a dead language instead of learning about the law or bugs. No amount of arguments will sway me. The bugs don't care what you call them. Criminals are guilty or innocent whether or not you speak funny in court. You've just made a simple thing harder for no good reason, that is all. Please stop.
[3] Yes, I've seen this. Twice, from two different people whom have never met. Aliens are amongst us.
We run into these kinds of issues quite often. I also majored in physics, but unlike you, I dropped out of my master's program (I just didn't have the talent. Given my generally limited intelligence, it was probably an inevitable outcome). From what I've read, the article seems to be arguing against the claim that because so many anomalies have accumulated in the field of GA, it's now ready to become a general purpose tool. Your argument appears to be that GA has been nicely organized as a standard library, essentially defining invalid states. So it's a high level abstraction perspective, but on the other hand, I think it could also be framed as a case against excessive abstraction. Interesting
> biologists and lawyers spend half a decade or more studying... Latin.[2]
> [2] Let me be crystal clear: They're spending their precious time on this Earth learning a dead language instead of learning about the law or bugs. No amount of arguments will sway me. The bugs don't care what you call them. Criminals are guilty or innocent whether or not you speak funny in court. You've just made a simple thing harder for no good reason, that is all. Please stop.
The absurdity of this claim is enough to call into question everything else in your post.
As a programmer I’m wondering how you get a decent graphics library out of it. If it’s conceptually better, shouldn’t it make writing code to do calculations easier?
A major problem is that its a very general theory. Most calculations turn into very large but very sparse matrix multiplications. To make them work fast requires code generation and an optimization pass.
These types of optimization problems show up all over graphics programming though:
* Representing rotations with matrices takes more space than quaternions.
* Sacrificing a dimension to projective geometry actually makes representing things like projections (duh) but also translations more efficient.
> shouldn’t it make writing code to do calculations easier?
You need an optimizing compiler that would take the high level description (in GA) and compile it to add subtract multiply divide of reals (the assembly language). I don't think we have that yet.
Till we have such a compiler it will be tempting to drop down to assembly. Assembly being a metaphor.
(This is a nitpick and does not argue against your main claim that GA is a better abstraction to represent and solve physics problems with, that I have no way to evaluate because I don't speak GA, though now I'm curious and will maybe spend an afternoon trying to figure out)
I mean, come on, lawyers and biologists don't really spend half a decade studying Latin. You can tell because smart people that spend a year or two studying Latin are conversationally fluent in it, and lawyers aren't.
They spend a month or two memorizing some latin words that could have been in English, and then (for biologists, lawyers just stop there) years memorizing lots of names of things that they'd have to memorize no matter what language they were in, and it's not really any slower in Latin than it would be in English once you spent that O(1) effort to get used to it.
Like us (systems) programmers don't spend decades studying the C language, we spend a year or two getting comfortable in C and then the rest of our careers learning all sorts of interesting ideas like generational GC that come phrased in pseudo-C but might as well have been phrased in English pseudocode with a similar cognitive load to grokking them.
That wonderful popcnt() algorithm that uses 0x33333333 and 0x55555555 constants would be just as hard to decipher if it was written in plain English.
I graduated with a Bachelors in Math in 2018 and there's an entire new math now?
For people who actually know the curriculum side: where does geometric algebra fit? Is it something that should come after Calc III / linear algebra, alongside linear algebra, or as part of a more geometric replacement for vector calculus?
The idea is that it's an alternative way of talking about vectors, rotations, and geometry in general. I.e. a replacement for the vector notation you learned that makes it operate more like how complex numbers are used.
Math professor here. If you want to learn math, then for the most part I recommend choosing time-tested avenues, using popular materials.
There are two reasons for this:
(1) Popular materials are usually popular for a reason: they reflect an approximate consensus, across a significant fraction of the mathematical community, that their approaches are more-or-less the best.
(2) If you learn the same way everyone else does, you'll have an easier time talking to others and finding materials on the internet.
I know some very innovative books which I highly recommend, for example Visual Group Theory by Nathan Carter:
But the innovation is pedagogical, in what Carter chooses to emphasize and how he presents everything. At the book's core, Carter agrees with everyone else about what the foundations of group theory are and should be.
Even Sheldon Axler's Linear Algebra Done Right (another excellent book), with its hilariously provocative title, only differs in its choice of emphasis and order of presentation. His choices are quite compatible with everyone else's.
Rational trigonometry is useful in some contexts (I’ve optimized trig computations with it in the past) but I wouldn’t call it GA, it’s a different kind of beast.
TLDR it is quite a bad article. One of the closest thing he has to a real argument is "I don't like it when geometric objects are identified with operators, I want those to be separate things". But this is both anti-GA and anti-Lie-Theory. As he says, he is critical of mathematics as conventionally practiced. So be warned that if you find yourself disliking GA for anything like the reasons he dislikes GA, there's a lot of other (mainstream/prestigious) fields you dislike too.
Is there another mathematician (likely an analyst) out there that finds this debate even more absurd with the existence of geometric measure theory? GMT bypasses all of these algebraic constructions; it finds very similar objects (currents and varifolds), but it just makes more sense to me. I never found the exterior algebra (or the Clifford algebra) to be a natural way of thinking geometrically. I do not agree that the exterior product is more natural than Jacobians and determinants. I was relieved to find that GMT cut through all of it at higher generality, at least for my purposes anyway. I don't think this belief is shared by many, since GMT is apparently notoriously incomprehensible, but hey, maybe there's someone else out there?
The basic issue with geometric algebra is that geometric vectors generally do not have a distinguished notion of unit magnitude (is unit magnitude 1 meter? 1 mile? 1 inch?), so it is silly to work in a framework that requires pretending they do (since the definition of the geometric product of two vectors is dependent upon this choice). Dimensional analysis (a very handy way of tracking mathematical symmetries and thus sanity checking results) goes out the window when working with mixed grade multivectors.
This is not an issue when working with non-mixed-grade multivectors, for which dimensional analysis works just fine in the ordinary way. As the linked article notes, exterior algebra/the wedge product is great. Thinking about exterior powers of vector spaces is great. It's the further move of forcing everything into a Procrustean bed of Clifford algebra that is misguided for almost any application other than some spinor stuff.
Those quadratic forms loop in some nice structure for modeling all kinds of geometric problems with high level control that's hard to articulate so concisely otherwise. Conformal geometric algebra is awesome to work with, have you tried it?
But mostly the broad strokes points about the community are exactly the kind of hostility that makes geometric algebra communities so refreshing for curious young people. Geometric algebra is a welcoming pedagogy and community as much as it is a mathematical framework. If only mathematics as a whole was more welcoming.
I started out on with shaky linear algebra despite years of undergraduate education, but plenty of curiosity and intuition. The geometric algebra community schooled me and me prepared me for all kinds of "real math".
Yes the attitude that geometric algebra is the best language for everything is misguided and welcomes a lot of confusion, but most serious geometric algebra people I've met don't actually think that or say that. They're just off doing cool stuff.
This seems like the pi vs tau argument on steroids. A lot of people who know a bit of math think that tau simplifies things enormously. Professionals are like "not really"; dropping a 2 in places simplifies a few formulas, makes others slightly more complex, and provides zero insight.
The hard problems in math are almost always still hard no matter the notation you choose to use. Sometimes notation makes transmitting ideas a bit easier, but usually faffing around with notation is a sign you aren't able to solve the real problems.
> It was already widely understood that projective geometry allowed one to represent rotations and translations in R^3
with a single linear operator on R^4.
I think it's projection operators (in linear algebra) that allow one to do that, not projective geometry [1]. The latter, AIUI, studies projective spaces and projective transformations on them (which differ from vector spaces and their transformations by including "points at infinity"), contains no concepts of length or angle (and therefore no equivalent of translations and rotations) and is in some sense "geometry with only the straightedge, no compass".
Curious if I'm just missing something there, though. I'm no expert on any of this.
As you say, projections and rotations are easily accounted for in linear algebra. The issue is that translations are not a linear transformation. For instance, consider f(x) = 2 + x. It's certainly not the case that f is linear -- that is, that f(cx + y) = c f(x) + f(y) -- because on the one hand we'd expect 2 + cx + y, and on the other we'd expect (2 + cx) + (2 + y), which is 4 + cx + y.
However, translation is an affine transformation, which is a particular case of a projective transformation [0]. It turns out that we can represent 3D affine (and general projective) transformations using a 4x4 matrix -- that is, as linear transformations in one dimension up, in a similar sense as how we can represent complex numbers as particular 2x2 matrices [1]. So yes, projective geometry is the right theoretical lens, even if we're usually able to forget about it (somewhat) when we use matrix representations.
Ah, interesting. I see "homogeneous coordinates" are covered later in the book I've just started reading (Projective Geometry, Coxeter) as a way of representing projective space. I think that's the link I couldn't see.
It's one and the same, or rather, one is a special case of the other.
The homogeneous coordinate system used to represent affine transforms in R^n using linear transforms in R^(n+1) is exactly the same as what is used to represent projective transforms in the projective space P(R^n). This is famously exploited in 3D graphics where 4x4 matrices can represent linear and affine transforms and perspective projections (modulo the final w-division normalization step).
Affine transforms are a special case of projective transforms where the last row (or column depending on convention) vector is (0, ..., 0, 1).
Personally, I've got a line of mileage out of using GA to express animation rigs.
I don't know about the rest of the article—I'm not a mathematician—but I certainly enjoying using GA a lot more compared to linear algebra, I find it way more intuitive and being able to visualize intermediate products on my rig is like a super power.
The part in this that I most question / deviate from is what I've quoted below about having distinctions (syntactically?) between objects and operations. Conceptually, it's a good distinction. But is it so clearly wise to bake in that distinction into the formal framework when doing calculations or proof?
> Most of the time we think of complex numbers as vectors in R2 or as rotation+scaling operators, but rarely do we actually we want them in both roles at the same time. So it is not very natural to equate the two objects, as opposed to finding a correspondence between them.
> So GA ends up being very stuck because it equates “vectorial objects” and “operators that act on vectorial objects”. It would be better to express all the geometric objects you care about in their most natural forms, and then find isomorphisms between them when it’s necessary to do so. Otherwise all the meanings get blurred together and it’s very confusing. So that’s another problem with geometric algebra: eliding the distinction between vectors and operators is undesirable, confusing, and disingenuous.
This is like a type theory question - do you like it untyped or typed?
In physics, values have units too. Analogously, you could say - why incorporate units into the algebra in physics (as is often done)? Why not just add scalars etc. and not bother carrying around the units everywhere?
Well, because doing anything else is mostly nonsensical - it does not make sense to add meters and seconds together. Using unit algebra is the most basic sanity check as to whether your formula makes any sense.
Sometimes it makes sense to convert/cast between representations, but that should be explicit - distinguishing eg. objects and operations is more readable and more safe, and only comes with a bit of notational overhead. Nothing is free, but I think the benefits far outweigh the downsides.
One finds in regular vector algebra that "position vectors" and "displacement vectors" are sort of two distinct types of objects, and that it is never physically valid to add two position vectors together unless you create an affine combination like (a+b)/2. A position vector 'a' is really 'O + a', so [(O+a) + (O + b)]/2 = O + (a+b)/2, another position... but a+b on its own would really be (O +a) + (O + b) = 2O + a + b, which is not geometrically meaningful. So positions and displacements might both be elements of R^2, mathematically speaking, but there is something physically different about them, which physical applications/geometry forces you to contend with. I think it is something like a historical accident that there's not a great notation for expressing this in normal mathematics (or at least, I'm not aware of one!).
In my opinion, the article is very mistitled, because it does not contain even a single valid criticism against the geometric algebra theory, despite containing some perfectly valid criticism against some mistakes frequently made by geometric algebra proponents.
The author has completely failed to understand the meaning and the purpose of geometric algebras, though to be fair this is not entirely the author's fault, because there are a lot of bad presentations of the geometric algebra theory, many of which contain actual mathematical mistakes, as listed in an article by Eric Lengyel that is linked in the parent article.
The main correct criticism of the parent article is that the geometric product is an operation that is seldom useful in practice.
In practice, the important operations are the generalizations of the inner product and of the outer product. The inner product and the outer product have been defined by Hermann Grassmann in the 19th century and the publications of Grassmann together with the theory of quaternions by Hamilton have been the sources on which William Kingdon Clifford has created the theory of geometric algebras.
Unfortunately, today a lot of people use incorrectly the term "outer product", using it to name the product defined by Johann Georg Zehfuss, which is also called "tensor product". "Tensor product" is also not a really appropriate term, but at least it is not as ambiguous as "outer product" has become, so it should always be preferred for the Zehfuss product. For the outer product in the Grassmann sense, a non-ambiguous term is "wedge product" though it is rather meaningless.
While the geometric product does not have a practical importance, it has a great theoretical importance, because with it the geometric algebras can be defined with a small set of simple and natural axioms. Then the operations that are important in practice, i.e. the generalized inner and outer (wedge) products can be defined based on the geometric product.
The author is right that some geometric algebra proponents have tried to shoehorn the use of the geometric product in some applications for which it is not the right tool, but that has nothing to do with the theory of geometric algebras.
The theory of geometric algebras has a modest practical importance, but it has an immense theoretical importance, because it unifies many mathematical concepts that previously seemed to be unrelated and it illuminates the relationships between them and also the distinctions between things that were previously confused, even by the best mathematicians and physicists, for more than a century.
There is a high probability that the progress of physics has been delayed by many decades by the fact that both William Clifford and James Clerk Maxwell have died prematurely and almost simultaneously, before they could make order, based on the theory of geometric algebras, in the mess that was at that time the theory of vectors, complex numbers and quaternions. After their death, the theory of geometric algebras has been forgotten and a lot of mistaken theories of vectors have been created, by Josiah Willard Gibbs, Oliver Heaviside and others (because they did not understand the relationships between various physical quantities, like polar vectors, axial vectors, quaternions, complex numbers, pseudoscalars).
When I have first encountered the theory of geometric algebras, that was one of the most beautiful moments in my experience of learning mathematics, it was like turning the light on in a dark room full of previously hidden things. The only similar moments, have been when learning for the first time projective geometry, the theory of spatial symmetry groups and certain parts of topology, which are also theories that have unified a great number of seemingly unrelated concepts.
Like I have said, geometric algebras have very little importance for writing algorithms or the like, where the classic linear algebra with matrices is what matters most, but anyone who does not understand geometric algebras does not really understand physics and this lack of understanding will prevent the correct solution of many problems.
It's a very fun framework when you're learning it. It constantly feels like you're learning something extremely profound and useful, but I've also found that feeling to be a bit of a mirage.
Despite trying many times to make greater use of it, I've found that it often just makes a lot of actual physics work less clear, and with very little practical benefit.
There's times where it affords quite pretty notation, but often you have to actually unpeel all that notation before you actually do something with it. And what's the point of nice notation if none of your colleagues can even read it? The only time I ever really found that GA was actually a benefit to me was performing rotations.
And my comment ended up being pretty long, so I will TL;DR it:
1. The social critique doesn’t match my experience and seems under-supported?
2. The technical critique is interesting, looks like a mix of good points, and some that need more work put into it. I think GA is legitimately cool in my opinion, but if there are better abstractions, we should find/define them and use them.
Longer version:
I hear people bring up the conspiracy/crackpot side of GA a lot, but I learned about Geometric Algebra a few years ago and am currently learning it alongside standard linear algebra.
I think GA is pretty cool. The author seems to have some decent points about its limitations and some ontological smells (like, maybe there is a cleaner representation hiding somewhere). But a lot of the criticism is aimed at the social side of the movement, and maybe I am just blind to it, but I have not really run into that much.
The author says things like:
Basically, GA is considered a kooky, crackpotty sideshow. And because it is so dubious and un-self-aware, the movement ends up alienating most people, except for a particular type of… zealous individual… who write about it with a sort of pseudoreligious zeal, and are prone to conspiracy, as if the only reason GA is not mainstream is that they are being oppressed by close-minded traditionalism.
and:
In practice GA always refers to the particular platform and social movement which descends from the work of David Hestenes from the 1960s. It specifically does not refer to the underlying material of Clifford Algebras
Maybe this is true in some parts of the internet or in some older discourse, but from the material I have read, people seem pretty explicit about the roots of Geometric Algebra.
Trying to build a unifying framework seems pretty normal to me. Lots of math is trying to expose common structure across different domains. Category theory, abstract algebra, topology, and, to a much bigger extent, the Langlands program all have that flavor. Obviously some unifications are more successful than others, but “this gives a unified language for a bunch of things” does not seem like a red flag by itself.
Some of the actual technical criticisms of GA are interesting, e.g. the proliferation of operations, but at this point I'm more interested in a formal accounting of the complexity of both theories rather than opinions or vibes. It would be nice to have description-length / complexity-accounting comparison of the formalisms.
Disclaimer: I have not read Hestenes’s original work, so maybe I am missing some of the historical baggage. But the modern resources I have seen seem mostly grounded in their claims.
I'm also learning both GA and linear algebra at the same time, GA has definitely helped me understand the linear algebra more deeply. In my opinion, alternative representations like GA gives your brain more structure to grab onto, even if they aren't perfect.
Also... math pedagogy does have a lot of inertia that hurts students. Doesn't Lockhart's Lament famously resonate with anyone who fell in love with math?
When I wrote " GA is considered a kooky, crackpotty sideshow..." I didn't mean I consider it to be..., I mean, it is the case that it is considered to be.... I guess I'm surprised if you haven't run into this? I'm not sure, but it's am impression I've gotten online for a long time. And if you read many of the older Hestenes-era writings you can't help but get it yourself.
I agree about the importance of alternative representations, but, people should be somewhat careful about which ones they're espousing. Sometimes people get quite enthusiastic about wedge products and then think what they're excited about is geometric algebra. Personally I would like to see wedge products taught alongside vector algebra and calculus. But I don't see a useful place to include the geometric product, except as more better way of stating things about actual Clifford algebras (quaternions and gamma matrices). I do suspect that there is a 'better' version of GA that is important than that, but I haven't seen it described.
Not a fan of the article. It resorts to ad hominem attacks like
> GA had gotten a bad reputation because of its tendency to attract bad mathematicians and full-on crackpots. Hestenes honestly sounds like one a lot of the time, and I’m not really sure whether he is or isn’t. It makes sense, really.
> GA ended up appealing to a lot of fringes: people who only had undergraduate degrees, people who had dropped out of PhDs, people with PhDs from unrigorous programs, people who had been good at math but were perhaps going a bit senile, random passerbies from engineering or computer programming, run-of-the-mill circle-squarers, people who had a bone to pick with establishment mathematics and felt like all dissenting views were being unfairly suppressed
> It didn’t help that a lot of the texts by the actually-competent GA people, like the Cambridge group, tended to say things that sounded and still sound kind of crackpotty as well.
After reading the article, the main "case against geometric algebra" I could find in there was that the author does not like the people using/doing research in geometric algebra, such as the ostensibly failed academics from a Cambridge research group [1] which the article links to.
I was expecting in the "An Actual Case Against GA" section that the author would demonstrate something like "Geometric Product actually does not work if you apply it to xyz domain". Rather, the section just ended up being mostly about the type of bikeshedding you see about naming of variables in programming.
There is I guess merit to the core "there is no good general interpretation or usage for the geometric product or mixed-grade multivectors" thesis of the article but calling other academics crackpots really subtracts from that message.
[1] https://corde.phy.cam.ac.uk/
I think this is unfair to the article.
Those paragraphs are in the background section, clearly labeled as "this is what other people think", and are followed with a high effort explanation of (presumably) the substance of the theory and why the author considers some of their ideas to be good and others to just increase the confusion.
The technical arguments are less like variable naming discussions and more like arguments against teaching logic circuit design with only nand (without naming the and/or/not operators) or using untyped lamba calculus (with Church numerals, e.g. `3 := λf.λx.f (f (f x))`) to do calculations on numbers.
At the least, the five bolded statements summarizing 5 of the 7 highly technical arguments should count as substantial claims.
Of course, having learned of the subject only from the author, it's hard to know whether it's a good representation of GA or a strawman, but the theory that he teaches as GA indeed seems quite flawed as a tool for thought.
Only tangenially relevant, but the exagerrated differentiation of universities, and levels of education (e.g. PhD vs. not) has always been bothering me. I only have experience in a different field (CS), and yes, those things can be indicators, but I've experienced so many outliers in both directions to know that degrees need to be taken with more than just a grain of salt.
This differentiation is amplified in (pure) mathematics, where two different subfields can have essentially zero overlap*, making peer review and general QA difficult to scale.
* Physical sciences also have a lot of diversity, but at least you can go to their labs and see their equipment, reagents, data, etc cetera.
Yes, this is essentially because mathematics is such an old science and goes very deep into branches. That's btw also why getting a certain degree is much harder there than in any other fields I've seen (did a bunch of courses at university in various fields, and the diff between e.g. pure math and psychology is almost comical).
I meant it more as an assessment of the state of affairs, not as an ad hominem (I have no opinion about the people at all). IMO the crackpottery is impossible to ignore, and if you don't talk about it everyone feels like they're going crazy. It's a very widely-noticed thing that is distinct and bizarre compared to other parts of math.
Crackpot really has connotations like "flat earther" and "aliens built the pyramids". It's one thing to say "I believe GA proponents' claims regarding the usefulness of the geometric product are overstated". It's another to say "GA proponents are crackpots".
Well, I said "sound kind of crackpotty", not "are crackpots", about the reputable writers. My point (ish) is that I would really like it if the non-crackpot GA writers would try a lot harder not to sound like crackpots! It is a real issue. I've never seen writing in any other field of math which so frequently strays into sounding unhinged. (Referring mostly to Hestenes + the Cambridge group here.)
The geometric product is transform composition.
TRANSFORM COMPOSITION!
(sorry, it's not your fault or even his that you didn't know this - GA textbooks should have it as the first thing they teach but they don't)
Is that linear composition or affine?
Can do either! If your multivectors represent linear transformations then their products will also be linear transformations. If they're affine transformations then their products will be affine transformations. Euclidean, conformal, etc!
you might want to read this post by a GA researcher: https://terathon.com/blog/poor-foundations-ga.html
especially the part about duals -- made me feel like I was going crazy when I was trying to figure out degenerate metrics: every source deals with it in a slightly different (often sloppy) way; you're sure it all must be possible to resolve and get something beautiful and consistent, but not while you're trying to apply it to a specific problem you need to solve
It does starts to sound a bit like chortling about what a weird asshole Semmelweis is. ISTR to recall that US students of linguistics were slow to adopt the International Phonetic Alphabet because it North America it had become associated with elocutionists, and no proper academic linguist wanted to look like an elocutionist grubby.
> After reading the article, the main "case against geometric algebra" I could find in there was that the author does not like the people using/doing research in geometric algebra
Mathematics is a social activity. The research cultures of different branches matter.
Which is why articles like this are obnoxious
> I could find in there was that the author does not like the people using/doing research in geometric algebra
The start of the article makes a specific technical claims:
> Hestenes’ Geometric Product is not a very good operation and we should not be rewriting all of geometry in terms of it
Later he explains why:
> there is no good general interpretation or usage for the geometric product or mixed-grade multivectors
How is the geometric product any less motivated than any other notation? Ultimately the value of a notation is how easy it makes it to work and think. I'm not sure if GA achieves that or not, but what's the harm in trying a new approach?
AFAIK nobody is proposing to replace all of geometry with GA, only 3+1 spacetime.
Author doesn't argue against the idea of choosing a new notation, he makes very detailed arguments about why this specific new notation is clumsy to work with.
Yes but my point is that their argument is undermined by the extreme clumsiness of standard mathematical physics notation. I don't believe GA is the best possible notation for physics but it could be a stepping stone. We need more people who explore such things rather than more people who call each other crackpots.
I’m just refuting the claim that the article only focuses on ad hominem arguments.
He's distressingly wrong about this, the geometric product is transform composition
(Apologies to folks who have seen me repeat this a million times; but it's very important folks be aware of it)
From a mathematician's point of view, yes, you should write the Maxwell field equations, at least to see it once, that way because you're showing a very low-level symmetry that even the differential forms approach doesn't get all the way to. Differential forms is a standard approach for general relativity, e.g. MTW.
I guess the people pushing this are a little pushy, but this reminds me of the whole pie fight over the Rust community. OK, so they're pushy. Nothing to do with the merits or demerits of the language (or of C for that matter).
If you're a baby duck about linear algebra and geometry, there's no need to care about different formalisms. Do whatever works. But it's interesting to see how all of this stuff comes together at different levels, whether it's the geometric product, differential forms, or just linear algebra.
> From a mathematician's point of view, yes, you should write the Maxwell field equations, at least to see it once, that way because you're showing a very low-level symmetry that even the differential forms approach doesn't get all the way to. Differential forms is a standard approach for general relativity, e.g. MTW.
While it's neat to write them all as one equation, I disagree that it's an enlightening perspective to learn. While it seems like writing Maxwell's equations in one equation instead of two is a step forward with even more symmetry, what is actually going on is that you are obscuring the most important part of Maxwell's equations: the gauge structure. Without this, it actually becomes much more hidden just how geometric electromagnetism is.
When you write Maxwell's equations as the pair `dF = 0`, `d*F = J`, the first of those two equations is exactly what tells you that this is a gauge theory, and thus may write `F = dA` where `A` is a vector potential. This vector potential then becomes the connection which defines a covariant derivative in a fibre bundle, and one then sees that charged particles follow geodesics now in spacetime, but in an enclosing fibre bundle. This is foundationally important to modern physics, and IMO obscured by writing Maxwell's equations as `∇F = J`
____
n.b. I'm not a particularly big fan of differential forms either, I think it leaves a lot to be desired, and it's super awkward to constantly have to pull out Hodge Duals every time you want to do something that involves the metric, but I'm also unconvinced that geometric algebra is the answer here.
What interests a mathematician isn't 100% the same as what interests the physicist. All I'm saying is there is some math there that's interesting and people should see it once for the math.
And then there are us engineers. I don't care much either way whether Maxwell's equations are ∇F = J or some other form, as long as it makes the problem easier to solve.
If I were in the GA Marketing Committee I'd publish a paper with suitably hand-picked worked examples where the vector approach is long and tedious, and GA version is short and sweet.
I like this idea but I get the sinking feeling GA proponents don't really solve problems with GA. Like how Haskell advocates don't write programs and modular synth enthusiasts don't write music.
Application of the Method of Moments to solve full wave formulation of Maxwell's equations. To derive the EFIE using maxwell's equations is a massive pain. With geometric algebra, all you need is ∇F = J and the MoM becomes a mechanical process.
I guess I'd say my point though is that the gauge structure is the mathematically interesting part of Maxwell's equations. (i.e. the fact that `F` is a closed differential form).
Without it, I think it'd be of significantly less mathematical interest because it'd lose almost all of its geometric properties.
There isn't just ONE interesting facet of this. There isn't just ONE mathematical formalism of a lot of these things. GA is just one of those approaches and you should see it just once, just like you should see the group structure and all of that as well. For most applications, the standard vector calculus approach is fine. But the math underlying all of this is full of richness and no one approach is the skeleton key.
Same with programming languages. Some people are like RUST RUST RUST and some are like C C C! I'm like, you guys only use one language?
> pull out Hodge Duals every time you want to do something that involves the metric, but I'm also unconvinced that geometric algebra is the answer here.
I don't know, I recently tried to work out how the metric on vectors/1-forms induces a metric on higher-degree forms, and if the geometric product magically gives this for free I'd say it's a win (same for the Hodge star).
Both differential forms and geometric algebra are awkward for that sort of thing. I'd just stick with abstract index notation most of the time.
agreed, when you start needing the the hodge star, diff form loose quite a lot of their interest.
i'd add it's quite nice in string theories for RR fields and coupling to D-branes, where writing 10 anti-symmetrized indices quickly gets annoying.. and topological field theories..
Note that by introducing the co-differential δ, you can write the Maxwell equations as a single expression (δ + d)F = J in the differential forms approach.
However, from the perspective of Yang-Mills theory, that's rather questionable as you're stitching together the Bianchi identity and the Yang-Mills equation for no particular reason.
what is MTW?
https://en.wikipedia.org/wiki/Gravitation_(book)
The space time approach with E as t wedge x and B as x wedge y is purely linear algebra, not differential forms.
As opposed to the weird GA form it actually makes the physically most meaningful symmetry (Lorentz transformations) explicit. That's why it's actually used in Physics.
Anti symmetric space time tensors are the absolute standard. Further formulations that reveal other aspects, dualities, symmetries are much more niche and specialized subjects and not how the subject should be taught when first encountering it.
https://en.wikipedia.org/wiki/Covariant_formulation_of_class...
One should teach the next generation the best way possible, and not turn them into conformists.
"Standards" are things to be overcome when they've outlived their prime.
Disparaging new ideas as "niche" and "specialised" when their explicit aspiration is to be better foundations is motivated reasoning.
OK, well, MTW is a pretty standard GR textbook and it is often cited as a useful text on differential forms for math.
Is this really a big debate? I am in the similarly-named (but apparently distant) field of algebraic geometry and have never even heard of geometric algebra. Certainly I know about Clifford and exterior algebras, but this debate has never reached me.
I tried to solve some engineering problems with PGA few years ago. Seemed to work OK up to a point, and at least for me was easier to approach than say Lie algebra or differential geometry.
TFA denigrates papers and websites that are "non-theoretical" or "trivial". As a user of the formalisms, these kinds of materials are exactly what I need. I don't care about proofs or theoretically problematic corner cases that "real mathematics" seems to be almost exclusively interested in.
I did hit a wall quite soon with GA, and got a feel that it may indeed be overhyped, but at least the scene seems to be interested about applied use.
There seems to be similar debate about nonstandard calculus. For my modest use it has provided some tools that can give me results that I don't know how to get with epsilon-delta etc. I don't really care if I don't "really understand" it because the underlying proofs need some heavy machinery. I don't understand those for standard calculus either, and in applied use you either manipulate infinitesimals without any proper algebra, or just hope what you need is in some table.
I can't comment on deeper theoretical or philosophical questions about these, and I don't really care about them. But to me maths communication often seems analogous to making people learn turing machines and lambda calculus before they are allowed to program in Javascript.
I don't think the author necessarily disagrees with me much, but this is maybe a kinda mini rant from a perspective of someone who is just an "end user" of mathematics.
> I did hit a wall quite soon with GA
can you give an example of what's impossible/hard to do?
I don't recall the details anymore, and the work never amounted to anything, but generally it was about finding expressions for some properties of the visual flow field under curvilinear motion.
I can't really say if the problem was with me or GA. Probably more like GA didn't end up providing tools for my level of math skills to solve the problem. But neither did the the traditional branches.
> I don't care about proofs or theoretically problematic corner cases that "real mathematics" seems to be almost exclusively interested in.
That is a rather strange take for a software engineer.
When implementing something I do need to know what the corner cases are, whether the runtime can enter such a state. I need to think how to put in checks so that they cannot be reached, or alternatively, how to recover gracefully. That's my job after all, why would anyone pay me if I didn't.
Perhaps a topical example is a gimbal lock. I need to be aware that it can happen and I need to know how to prevent it.
I didn't mean corner cases like that. I mean stuff that has no practical consequences, at least for most practical use.
E.g. whether or not Navier-Stokes can form singularities doesn't really change how you analyze fluid dynamics in engineering. This doesn't mean it is not a mathematically important question worth extensive study, but it's not relevant for practitioners.
Got you.
This article captures so much of what I have felt but been unable to put into words about GA. I come from a computational physics background, and when translating theory into numerical algorithms, the dimensional analysis and units are very important (you have to be able to relate the simulation to something in the real world!). GA dispenses entirely with any notion of meaningful units, making the dimensional analysis and error checking extremely difficult. The geometric product has always seemed like some strange mathematical trick or coincidence that happens to maybe have some useful properties. Almost like how "new math" is perhaps easier to learn or understand at first, but you really just need to sit down and understand algorithmically what is going on with the basic arithmetic operations.
100 percent agree with the article. Wedge products are fundamental, GA is weird ideology.
I had the bad fortune of reviewing some GA research articles once upon a time. It was almost embarrassing. Everything of substance had been published in a conceptually cleaner bivector language previously. The only "contribution" was writing everything in terms of weirder, more convoluted concepts that contributed neither technical clarity nor conceptual parsimony.,
Do you by chance have references to those conceptually cleaner bivector publications? I've spent a good bit of time looking for other people working in that space, and haven't found much other than an article by Jancewicz from 1980. (I like to imagine that my articles these past few years have been "conceptually clean", but they certainly aren't "previous" to much GA work.)
My feeling on geometric algebra is that you should look too much into it until you exhaust the exterior algebra. That is (in my opinion): it isn't a good use of it to replace the cross product or specialized representations of 3-d geometric rotations. It is good for when you get a bit sick of the bookkeeping of the exterior algebra. From a computer scientist point of view it is sort of adding a bit of type information beyond just vector dimension and depth of product.
META: Pulling this out of its original context because I think more readers would find the code amusing. I am breaking the rules, but hopefully for a good/pardonable reason.
> Most of the time we think of complex numbers as vectors in R2 or as rotation+scaling operators, but rarely do we actually we want them in both roles at the same time.
I can give one counterexample.
I was asked to comment on a piece of code that did 2D geometry in Python. There was one piece that was a tangle of trigonometry to find the angular bisector of an angle subtended at the origin by two points.
Using the fact that points can be represented by complex numbers and that rotation is just multiplication one can make that function into a one liner.
The geometric mean of the two points as represented by complex numbers gives you the bisector. Python has native support for complex numbers so all the computation is handled by the runtime.This is like how one often wants to distinguish the points of an affine space from the vectors representing displacements in that space (there is no distinguished origin for the physical world, but there is a distinguished concept of zero displacement). One can add a vector to a point to get a point, or a vector to a vector to get a vector, but cannot add a point to a point to get another point. Yet, it is meaningful to treat a linear combination of points in an affine space as yielding another point in the same space when the weights of the linear combination sum to 1.
The exact same thing is happening here, only multiplicatively, where z1^(1/2) * z2^(1/2) is a combination with two weights of 1/2 (thus, summing to 1). It is geometrically meaningful to treat 2d vectors (displacements in a plane) as complex numbers, raise them to exponents summing to 1, and then multiply these together to get another vector in the same plane. But it is not generally geometrically meaningful to just multiply one vector by another vector to get a third vector in the same space (because this would require distinguishing some particular direction and magnitude as "1").
I agree with you on three dimensional vector products. It's too special, too cute and doesn't generalize to all dimensions, and as you said, you have to keep track of the two types of vectors.
On complex multiplications though, I disagree. It's a great way to do Euclidean manipulations on the 2d plane. Rotations, translations and reflections (via conjugates) are simple. You rarely need calls to trigonometric functions.
If you have runtime support, it's sorta criminal not to use complex multiplication when applicable.
BTW there is another, equivalent, way of deriving the solution which to me seems more intuitive (and not limited to sum of powers to 1):
The angular travel from z1 to z2 is
I want to travel half of that, so This half travel I apply to z1 like so done.If the need was to continue to travel angularly (rotate) beyond z2, say double the subtended angle, that's easy too. No need for the constraint the sum of powers be 1.
@chinjut yes you are exactly right about sum to 1 bit.
For a moment I had got distracted by the exponential between Lie group and algebra.
What magnitude are you expecting your angle bisector to have afterwards?
There was only the need for the point on the bisector (on the unit circle). There was no need for the magnitude of the angle.
The only thing that needed care was which sign of the sqrt bisects the internal angle as opposed to the external angle.
In general I prefer not to deal with angles when dealing with 2D rotation. Get inputs in angles if need be and from then onwards use the (cos,sin) tuple or, equivalently, use complex numbers. One can get rid of calls to trascendentals as long as you are happy to call sqrt.
In other words angle is a tuple.
if they're unit vectors then yes that makes a lot of sense.
The same calculation works in R^n, incidentally, using the geometric product. This is pretty much the ideal usecase for it, for constructing operators between vectors.
Maybe that's my missing link for
https://news.ycombinator.com/item?id=48619191
You probably know this, but this is one way to generalize beyond 2D
https://en.wikipedia.org/wiki/Angle_bisector_theorem
from a theoretical physicist point of view, i find GA don't add much to the standard tooling ppl use, i.e. Lie algebras, Clifford and (sometimes) differential forms. while it's always nice to have a formalism that "hides indices", in most cases (for (super-)gravitation at least) just writing tensor/clifford/lie indices is just much faster and less error prone.
i used to use differential form for gauge theories, einstein-cartan gravitation and ramond-ramond fields.
also, in a paper, we used O(D,D) clifford algebras/spinors to represent differential forms, which worked quite well in our very specific case (appendix A)
https://arxiv.org/pdf/1304.1472
ps: i had colleagues that worked on GA for ML in robotics but wasn't really impressed by what it accomplished
> That part is fine. But why, then, does multiplying zzˉ give a “magnitude” that works in a reasonable way?
Because the product of all Galois conjugates is a norm and the determinant of the linear operator defined by general field multiplication of a primitive element when viewing the field extension as a vector space of the extension field over the base field.
Although the geometric interpretation of norms in Galois theory really only works for the complex numbers because only the complex numbers are a field. Quaternions are not a field.
With my limited knowledge, I read through it stumbling along, and from what I gather, this GA is not Clifford Algebra, and the argument is that the GA movement itself is misguided, and that combining operators and geometric objects without distinguishing between them is problematic.
From a programmer's perspective, it seems like they're saying it's a flawed abstraction, while the GA stance is different. I'd like to hear the other side of the argument too. I'm sure HN will get a long GA comment thread, so from their standpoint, what would it feel like? I agree that merging objects and operators is problematic, but I'm curious what the GA camp would say
Reading this article, I think there are quite a few interesting points to consider further. C started as a DSL for the Unix kernel. JavaScript is also a DSL, and successful languages are often described as DSLs in certain respects. Then, as they grow and gain broader adoption, they evolve into general purpose languages.
But if you think about it the other way around, since all programs are ultimately about data transformation, you could argue that UIs should essentially be drawn in SQL, but that would sound strange. That's because the tools we use have moved away from that mental model. (Though React's FRP premise does lean in that direction.)
And when I think about why languages split apart, it seems to me that it's because the word 'programming' covers so many different things at once. Languages end up diverging because they serve different purposes. In fact, as a programmer, I see programming languages as a collection of tools that essentially decide what to give up. C gives you safety and low-level hardware access through its ABI. Python gives you expressiveness. They exist because their target goals are fundamentally different.
In that sense, though I'm not an expert in this field, from my limited perspective this debate feels like it's just the noise that arises when Algebra tries to encompass too much and inevitably splits apart. I imagine these kinds of cases will only increase in the future. As things become more specialized, there will be more situations where existing frameworks don't fit, and new systems will be needed. Is there a term for this phenomenon? At that point, we might say we need to change the old system to fit the new one.
Personally, I wonder if there isn't a general purpose language at the bottom that models the entire world, with other languages layered on top of it.
> this GA is not Clifford Algebra
What makes you say that?
GA is Clifford algebra plus a bunch of new terminology plus advocacy that it should replace linear algebra.
Mathematician here.
> As I see it, GA is not so much a subject as an ideological position, consisting of basically two ideological claims about the world:
> Claim 1: That the concepts of EA (so, wedge products, multivectors, duality, contraction) are incredibly powerful and ought to be used everywhere, starting at a much lower level of math pedagogy—basically rewriting classical linear algebra and vector calculus.
I support this claim, so I suppose I’m a proponent of geometric algebra.
I think it’s more or less been carried out for vector calculus by Spivak’s “classical” Calculus on Manifolds, which is somewhat widely taught.
> Claim 2: That the Geometric Product (henceforth: GP) should be added to that list as the most fundamental operation, where by “fundamental” I mean that other operations should be constructed in terms of it, and theorems should be stated using it.
Like the author, I also believe this claim is nonsense.
“Rewriting classical linear algebra” is a honored pastime but it’s very difficult to make any headway doing it—the classical texts are classical for a reason, we more or less know how to teach them as an “80% solution” and it’s unclear that the investment in a new pedagogy would get us to an “81% solution.”
Especially with today’s undergrads. If you’re not churning arithmetic, they’re not into it.
I get why it is interesting and useful to write complex numbers in '+' notation rather than the conventional way to denote a 2d vector, like a tuple of components.
The benefit is that multiplication and distributive property is a beauty in the '+' notation, no special rules need to be memorized for multiplying 2d vectors, i*i = -1 takes care of it.
On the other hand I never understood what the benefit, of writing the tuple of wedge and dot products in '+'notation, is.
Perhaps I am not being fair, that it is the same idea and I have not used it as much as I have used complex numbers.
More or less agreed. I think though that one reason the geometric product is so tempting is that if you take matrix representations of all of these objects, then the geometric product is literally just straightforward matrix multiplication.
Because of that, it just becomes so tempting to try and phrase everything you can in terms of this geometric product. I'm very sympathetic to the temptation, and I even think the geometric product has some great uses (it shows up a lot in some physics I do), and using it makes writing rotations a treat, but I think it's still vastly overemphasized by GA people.
I still don't really know what my favoured notation for differential geometry is, I find myself switching around so much.
> I still don't really know what my favoured notation for differential geometry is, I find myself switching around so much.
Yep, me too. Maybe someday the HoTT folks will get around to formalizing it and standardizing the notation. /j
Interesting. To summarize your argument: the current state of Algebra is like an 80 point solution, but to push it a few points higher requires an enormous cognitive load, and the question is whether that's really worth it, even from an educational perspective. As mentioned in another comment, this is exactly the kind of issue that comes up in Rust discussions. It seems the argument from the GA camp is that top tier mathematicians are already using these tools just fine without needing to talk about it in that way, so there's no reason for it to become general purpose. Thank you for explaining it in a way that's easy to understand. But on the other hand, maybe anomalies like these could actually become generally useful concepts. Thanks for the comment. upvoted!
As someone who studies physics and then went into a long IT career (but kept reading papers casually), my view is that this whole GA saga is very reminiscent of how after decades of experience, I still can't convince juniors of the benefits of what I now consider obvious best practices. No amount of demonstrations of the blindingly obvious improvement of some better technique seems to work on someone who "finally got the thing to work".[1]
Certain kinds of perfect correctness are like pure and shining crystallised bits of refined knowledge created by the greatest wizards. "Parse, don't validate" or "Make invalid states unrepresentable." ought to be familiar to the better programmers here, the ones with decades of experience built on iterative, collaborative foundations with real consequences for error.
Theoretical physics doesn't have those same consequences, because there is no real punishment for their equivalent of "spaghetti code". Perversely, there's cachet to be gained for gaining understanding of its unnecessarily esoteric knowledge, much like how biologists and lawyers spend half a decade or more studying... Latin.[2]
Introducing Geometric Algebra to physics is like that wizard coder who sweeps away reams of spaghetti code and replaces it all with a call to a single standard library function. It's that "cheff's kiss" of cleanup. Meanwhile the juniors are screaming about how the senior "deleted all their hard work!"
Meanwhile, I never understood where Pauli and Dirac matrices came from! It's like they were pulled from fat air.
You've seen this in code, I bet. Some junior worked really hard on solving a problem and wrote a solid screen-filling wall of "a && b || c || !d && e && (f || g)..." continuing up to "ba, bc, bd", etc.. as they ran out single letters until they're well into the alphabet in double-character symbols.[3]
That's what those matrices are. Someone's hacky attempt at "making things work".
The problem is that we gave those people Nobel prizes and told everyone they're geniuses.
They are, but they were like that brilliant junior. Brilliant.. but junior.
Geometric Algebra sweeps all of that into one beautiful, consistent, crystal clear abstraction that is widely applicable. The magic matrix constants vanish. Bugs in 100-year-old textbook formulas suddenly come to light. Dozens of formulas, one set for each of the 1D, 2D, 3D, and 4D cases collapse into a single formula valid for any number of dimensions.
It's like watching someone struggle with "catching every possible instance of JavaScript injection".
No son, no. Just no. Stop enumerating badness. Stop. Just stop. Escape everything at the boundary instead, enforced by the type system. You'll thank me later.
I know it might be obvious to you, and you always use properly parameterised SQL queries or whatever. This is not the norm everywhere! I still get arguments, long drawn out arguments from people convinced that this is unnecessary and just one more search & replace is all they need to be safe from the bad hackers.
Physicists (and mathematicians) are still making that argument against GA.
"It's isomorphic!"
"That isn't the point!"
[1] You can't convince someone to climb Everest if they struggled to hike up to the top of one of its foothills.
[2] Let me be crystal clear: They're spending their precious time on this Earth learning a dead language instead of learning about the law or bugs. No amount of arguments will sway me. The bugs don't care what you call them. Criminals are guilty or innocent whether or not you speak funny in court. You've just made a simple thing harder for no good reason, that is all. Please stop.
[3] Yes, I've seen this. Twice, from two different people whom have never met. Aliens are amongst us.
We run into these kinds of issues quite often. I also majored in physics, but unlike you, I dropped out of my master's program (I just didn't have the talent. Given my generally limited intelligence, it was probably an inevitable outcome). From what I've read, the article seems to be arguing against the claim that because so many anomalies have accumulated in the field of GA, it's now ready to become a general purpose tool. Your argument appears to be that GA has been nicely organized as a standard library, essentially defining invalid states. So it's a high level abstraction perspective, but on the other hand, I think it could also be framed as a case against excessive abstraction. Interesting
> biologists and lawyers spend half a decade or more studying... Latin.[2]
> [2] Let me be crystal clear: They're spending their precious time on this Earth learning a dead language instead of learning about the law or bugs. No amount of arguments will sway me. The bugs don't care what you call them. Criminals are guilty or innocent whether or not you speak funny in court. You've just made a simple thing harder for no good reason, that is all. Please stop.
The absurdity of this claim is enough to call into question everything else in your post.
Hyperbole as literary device, not sworn testimony. Argumentum ad literalismum: dismissed.
As a programmer I’m wondering how you get a decent graphics library out of it. If it’s conceptually better, shouldn’t it make writing code to do calculations easier?
It can write some fascinating stuff, but you have to learn to think in it:
https://enkimute.github.io/ganja.js/examples/coffeeshop.html
A major problem is that its a very general theory. Most calculations turn into very large but very sparse matrix multiplications. To make them work fast requires code generation and an optimization pass.
These types of optimization problems show up all over graphics programming though:
* Representing rotations with matrices takes more space than quaternions.
* Sacrificing a dimension to projective geometry actually makes representing things like projections (duh) but also translations more efficient.
> shouldn’t it make writing code to do calculations easier?
You need an optimizing compiler that would take the high level description (in GA) and compile it to add subtract multiply divide of reals (the assembly language). I don't think we have that yet.
Till we have such a compiler it will be tempting to drop down to assembly. Assembly being a metaphor.
(This is a nitpick and does not argue against your main claim that GA is a better abstraction to represent and solve physics problems with, that I have no way to evaluate because I don't speak GA, though now I'm curious and will maybe spend an afternoon trying to figure out)
I mean, come on, lawyers and biologists don't really spend half a decade studying Latin. You can tell because smart people that spend a year or two studying Latin are conversationally fluent in it, and lawyers aren't.
They spend a month or two memorizing some latin words that could have been in English, and then (for biologists, lawyers just stop there) years memorizing lots of names of things that they'd have to memorize no matter what language they were in, and it's not really any slower in Latin than it would be in English once you spent that O(1) effort to get used to it.
Like us (systems) programmers don't spend decades studying the C language, we spend a year or two getting comfortable in C and then the rest of our careers learning all sorts of interesting ideas like generational GC that come phrased in pseudo-C but might as well have been phrased in English pseudocode with a similar cognitive load to grokking them.
That wonderful popcnt() algorithm that uses 0x33333333 and 0x55555555 constants would be just as hard to decipher if it was written in plain English.
I graduated with a Bachelors in Math in 2018 and there's an entire new math now?
For people who actually know the curriculum side: where does geometric algebra fit? Is it something that should come after Calc III / linear algebra, alongside linear algebra, or as part of a more geometric replacement for vector calculus?
The idea is that it's an alternative way of talking about vectors, rotations, and geometry in general. I.e. a replacement for the vector notation you learned that makes it operate more like how complex numbers are used.
Discussed at the time:
The Case Against Geometric Algebra - https://news.ycombinator.com/item?id=39576214 - March 2024 (15 comments)
Are these titles then the wrong avenue for learning math?
Projective Geometric Algebra: Illuminated (2024) (Not mentioned directly in the article [1]; including a quote from link [2].)
Algebraic Calculus (2016)
Divine Proportions: Rational Trigonometry to Universal Geometry (2005)
[1] https://terathon.com/blog/poor-foundations-ga.html
[2] "If you want solid foundations, this book is for you."
Math professor here. If you want to learn math, then for the most part I recommend choosing time-tested avenues, using popular materials.
There are two reasons for this:
(1) Popular materials are usually popular for a reason: they reflect an approximate consensus, across a significant fraction of the mathematical community, that their approaches are more-or-less the best.
(2) If you learn the same way everyone else does, you'll have an easier time talking to others and finding materials on the internet.
I know some very innovative books which I highly recommend, for example Visual Group Theory by Nathan Carter:
https://bookstore.ams.org/clrm-32/
But the innovation is pedagogical, in what Carter chooses to emphasize and how he presents everything. At the book's core, Carter agrees with everyone else about what the foundations of group theory are and should be.
Even Sheldon Axler's Linear Algebra Done Right (another excellent book), with its hilariously provocative title, only differs in its choice of emphasis and order of presentation. His choices are quite compatible with everyone else's.
https://linear.axler.net/LADR4e.pdf
Rational trigonometry is useful in some contexts (I’ve optimized trig computations with it in the past) but I wouldn’t call it GA, it’s a different kind of beast.
I'm a GA researcher. I did this livestream of my reaction to the article
https://m.twitch.tv/videos/2282548167
TLDR it is quite a bad article. One of the closest thing he has to a real argument is "I don't like it when geometric objects are identified with operators, I want those to be separate things". But this is both anti-GA and anti-Lie-Theory. As he says, he is critical of mathematics as conventionally practiced. So be warned that if you find yourself disliking GA for anything like the reasons he dislikes GA, there's a lot of other (mainstream/prestigious) fields you dislike too.
Is there another mathematician (likely an analyst) out there that finds this debate even more absurd with the existence of geometric measure theory? GMT bypasses all of these algebraic constructions; it finds very similar objects (currents and varifolds), but it just makes more sense to me. I never found the exterior algebra (or the Clifford algebra) to be a natural way of thinking geometrically. I do not agree that the exterior product is more natural than Jacobians and determinants. I was relieved to find that GMT cut through all of it at higher generality, at least for my purposes anyway. I don't think this belief is shared by many, since GMT is apparently notoriously incomprehensible, but hey, maybe there's someone else out there?
Yeah, while I’ve never used GMT for anything substantial I certainly like currents and densities.
That reminds me, I’ve been meaning to rewrite parts of Hormander’s epic with tools from GMT but never found the time.
The basic issue with geometric algebra is that geometric vectors generally do not have a distinguished notion of unit magnitude (is unit magnitude 1 meter? 1 mile? 1 inch?), so it is silly to work in a framework that requires pretending they do (since the definition of the geometric product of two vectors is dependent upon this choice). Dimensional analysis (a very handy way of tracking mathematical symmetries and thus sanity checking results) goes out the window when working with mixed grade multivectors.
This is not an issue when working with non-mixed-grade multivectors, for which dimensional analysis works just fine in the ordinary way. As the linked article notes, exterior algebra/the wedge product is great. Thinking about exterior powers of vector spaces is great. It's the further move of forcing everything into a Procrustean bed of Clifford algebra that is misguided for almost any application other than some spinor stuff.
Those quadratic forms loop in some nice structure for modeling all kinds of geometric problems with high level control that's hard to articulate so concisely otherwise. Conformal geometric algebra is awesome to work with, have you tried it?
But mostly the broad strokes points about the community are exactly the kind of hostility that makes geometric algebra communities so refreshing for curious young people. Geometric algebra is a welcoming pedagogy and community as much as it is a mathematical framework. If only mathematics as a whole was more welcoming.
I started out on with shaky linear algebra despite years of undergraduate education, but plenty of curiosity and intuition. The geometric algebra community schooled me and me prepared me for all kinds of "real math".
Yes the attitude that geometric algebra is the best language for everything is misguided and welcomes a lot of confusion, but most serious geometric algebra people I've met don't actually think that or say that. They're just off doing cool stuff.
This seems like the pi vs tau argument on steroids. A lot of people who know a bit of math think that tau simplifies things enormously. Professionals are like "not really"; dropping a 2 in places simplifies a few formulas, makes others slightly more complex, and provides zero insight.
The hard problems in math are almost always still hard no matter the notation you choose to use. Sometimes notation makes transmitting ideas a bit easier, but usually faffing around with notation is a sign you aren't able to solve the real problems.
Tiny nit / check of my understanding:
> It was already widely understood that projective geometry allowed one to represent rotations and translations in R^3 with a single linear operator on R^4.
I think it's projection operators (in linear algebra) that allow one to do that, not projective geometry [1]. The latter, AIUI, studies projective spaces and projective transformations on them (which differ from vector spaces and their transformations by including "points at infinity"), contains no concepts of length or angle (and therefore no equivalent of translations and rotations) and is in some sense "geometry with only the straightedge, no compass".
Curious if I'm just missing something there, though. I'm no expert on any of this.
[1] https://en.wikipedia.org/wiki/Projective_geometry
As you say, projections and rotations are easily accounted for in linear algebra. The issue is that translations are not a linear transformation. For instance, consider f(x) = 2 + x. It's certainly not the case that f is linear -- that is, that f(cx + y) = c f(x) + f(y) -- because on the one hand we'd expect 2 + cx + y, and on the other we'd expect (2 + cx) + (2 + y), which is 4 + cx + y.
However, translation is an affine transformation, which is a particular case of a projective transformation [0]. It turns out that we can represent 3D affine (and general projective) transformations using a 4x4 matrix -- that is, as linear transformations in one dimension up, in a similar sense as how we can represent complex numbers as particular 2x2 matrices [1]. So yes, projective geometry is the right theoretical lens, even if we're usually able to forget about it (somewhat) when we use matrix representations.
[0]: https://en.wikipedia.org/wiki/Affine_transformation#Represen...
[1]: https://en.wikipedia.org/wiki/Complex_number#Matrix_represen...
Ah, interesting. I see "homogeneous coordinates" are covered later in the book I've just started reading (Projective Geometry, Coxeter) as a way of representing projective space. I think that's the link I couldn't see.
Thanks!
It's one and the same, or rather, one is a special case of the other.
The homogeneous coordinate system used to represent affine transforms in R^n using linear transforms in R^(n+1) is exactly the same as what is used to represent projective transforms in the projective space P(R^n). This is famously exploited in 3D graphics where 4x4 matrices can represent linear and affine transforms and perspective projections (modulo the final w-division normalization step).
Affine transforms are a special case of projective transforms where the last row (or column depending on convention) vector is (0, ..., 0, 1).
Yes, I think I understand it (or am at least on the way to understanding it) now. Thanks!
Personally, I've got a line of mileage out of using GA to express animation rigs.
I don't know about the rest of the article—I'm not a mathematician—but I certainly enjoying using GA a lot more compared to linear algebra, I find it way more intuitive and being able to visualize intermediate products on my rig is like a super power.
The part in this that I most question / deviate from is what I've quoted below about having distinctions (syntactically?) between objects and operations. Conceptually, it's a good distinction. But is it so clearly wise to bake in that distinction into the formal framework when doing calculations or proof?
> Most of the time we think of complex numbers as vectors in R2 or as rotation+scaling operators, but rarely do we actually we want them in both roles at the same time. So it is not very natural to equate the two objects, as opposed to finding a correspondence between them.
> So GA ends up being very stuck because it equates “vectorial objects” and “operators that act on vectorial objects”. It would be better to express all the geometric objects you care about in their most natural forms, and then find isomorphisms between them when it’s necessary to do so. Otherwise all the meanings get blurred together and it’s very confusing. So that’s another problem with geometric algebra: eliding the distinction between vectors and operators is undesirable, confusing, and disingenuous.
This is like a type theory question - do you like it untyped or typed?
In physics, values have units too. Analogously, you could say - why incorporate units into the algebra in physics (as is often done)? Why not just add scalars etc. and not bother carrying around the units everywhere?
Well, because doing anything else is mostly nonsensical - it does not make sense to add meters and seconds together. Using unit algebra is the most basic sanity check as to whether your formula makes any sense.
Sometimes it makes sense to convert/cast between representations, but that should be explicit - distinguishing eg. objects and operations is more readable and more safe, and only comes with a bit of notational overhead. Nothing is free, but I think the benefits far outweigh the downsides.
One finds in regular vector algebra that "position vectors" and "displacement vectors" are sort of two distinct types of objects, and that it is never physically valid to add two position vectors together unless you create an affine combination like (a+b)/2. A position vector 'a' is really 'O + a', so [(O+a) + (O + b)]/2 = O + (a+b)/2, another position... but a+b on its own would really be (O +a) + (O + b) = 2O + a + b, which is not geometrically meaningful. So positions and displacements might both be elements of R^2, mathematically speaking, but there is something physically different about them, which physical applications/geometry forces you to contend with. I think it is something like a historical accident that there's not a great notation for expressing this in normal mathematics (or at least, I'm not aware of one!).
In my opinion, the article is very mistitled, because it does not contain even a single valid criticism against the geometric algebra theory, despite containing some perfectly valid criticism against some mistakes frequently made by geometric algebra proponents.
The author has completely failed to understand the meaning and the purpose of geometric algebras, though to be fair this is not entirely the author's fault, because there are a lot of bad presentations of the geometric algebra theory, many of which contain actual mathematical mistakes, as listed in an article by Eric Lengyel that is linked in the parent article.
The main correct criticism of the parent article is that the geometric product is an operation that is seldom useful in practice.
In practice, the important operations are the generalizations of the inner product and of the outer product. The inner product and the outer product have been defined by Hermann Grassmann in the 19th century and the publications of Grassmann together with the theory of quaternions by Hamilton have been the sources on which William Kingdon Clifford has created the theory of geometric algebras.
Unfortunately, today a lot of people use incorrectly the term "outer product", using it to name the product defined by Johann Georg Zehfuss, which is also called "tensor product". "Tensor product" is also not a really appropriate term, but at least it is not as ambiguous as "outer product" has become, so it should always be preferred for the Zehfuss product. For the outer product in the Grassmann sense, a non-ambiguous term is "wedge product" though it is rather meaningless.
While the geometric product does not have a practical importance, it has a great theoretical importance, because with it the geometric algebras can be defined with a small set of simple and natural axioms. Then the operations that are important in practice, i.e. the generalized inner and outer (wedge) products can be defined based on the geometric product.
The author is right that some geometric algebra proponents have tried to shoehorn the use of the geometric product in some applications for which it is not the right tool, but that has nothing to do with the theory of geometric algebras.
The theory of geometric algebras has a modest practical importance, but it has an immense theoretical importance, because it unifies many mathematical concepts that previously seemed to be unrelated and it illuminates the relationships between them and also the distinctions between things that were previously confused, even by the best mathematicians and physicists, for more than a century.
There is a high probability that the progress of physics has been delayed by many decades by the fact that both William Clifford and James Clerk Maxwell have died prematurely and almost simultaneously, before they could make order, based on the theory of geometric algebras, in the mess that was at that time the theory of vectors, complex numbers and quaternions. After their death, the theory of geometric algebras has been forgotten and a lot of mistaken theories of vectors have been created, by Josiah Willard Gibbs, Oliver Heaviside and others (because they did not understand the relationships between various physical quantities, like polar vectors, axial vectors, quaternions, complex numbers, pseudoscalars).
When I have first encountered the theory of geometric algebras, that was one of the most beautiful moments in my experience of learning mathematics, it was like turning the light on in a dark room full of previously hidden things. The only similar moments, have been when learning for the first time projective geometry, the theory of spatial symmetry groups and certain parts of topology, which are also theories that have unified a great number of seemingly unrelated concepts.
Like I have said, geometric algebras have very little importance for writing algorithms or the like, where the classic linear algebra with matrices is what matters most, but anyone who does not understand geometric algebras does not really understand physics and this lack of understanding will prevent the correct solution of many problems.
It's a very fun framework when you're learning it. It constantly feels like you're learning something extremely profound and useful, but I've also found that feeling to be a bit of a mirage.
Despite trying many times to make greater use of it, I've found that it often just makes a lot of actual physics work less clear, and with very little practical benefit.
There's times where it affords quite pretty notation, but often you have to actually unpeel all that notation before you actually do something with it. And what's the point of nice notation if none of your colleagues can even read it? The only time I ever really found that GA was actually a benefit to me was performing rotations.
> The only time I ever really found that GA was actually a benefit to me was performing rotations.
Maybe that's why I've found it so useful when doing rigging for animation—that's the entire job!
Background resource:
Comparison of vector algebra and geometric algebra - https://en.wikipedia.org/wiki/Comparison_of_vector_algebra_a...
I found this article pretty confusing.
And my comment ended up being pretty long, so I will TL;DR it:
1. The social critique doesn’t match my experience and seems under-supported?
2. The technical critique is interesting, looks like a mix of good points, and some that need more work put into it. I think GA is legitimately cool in my opinion, but if there are better abstractions, we should find/define them and use them.
Longer version:
I hear people bring up the conspiracy/crackpot side of GA a lot, but I learned about Geometric Algebra a few years ago and am currently learning it alongside standard linear algebra.
I think GA is pretty cool. The author seems to have some decent points about its limitations and some ontological smells (like, maybe there is a cleaner representation hiding somewhere). But a lot of the criticism is aimed at the social side of the movement, and maybe I am just blind to it, but I have not really run into that much.
The author says things like:
and: Maybe this is true in some parts of the internet or in some older discourse, but from the material I have read, people seem pretty explicit about the roots of Geometric Algebra.Trying to build a unifying framework seems pretty normal to me. Lots of math is trying to expose common structure across different domains. Category theory, abstract algebra, topology, and, to a much bigger extent, the Langlands program all have that flavor. Obviously some unifications are more successful than others, but “this gives a unified language for a bunch of things” does not seem like a red flag by itself.
Some of the actual technical criticisms of GA are interesting, e.g. the proliferation of operations, but at this point I'm more interested in a formal accounting of the complexity of both theories rather than opinions or vibes. It would be nice to have description-length / complexity-accounting comparison of the formalisms.
Disclaimer: I have not read Hestenes’s original work, so maybe I am missing some of the historical baggage. But the modern resources I have seen seem mostly grounded in their claims.
I'm also learning both GA and linear algebra at the same time, GA has definitely helped me understand the linear algebra more deeply. In my opinion, alternative representations like GA gives your brain more structure to grab onto, even if they aren't perfect.
Also... math pedagogy does have a lot of inertia that hurts students. Doesn't Lockhart's Lament famously resonate with anyone who fell in love with math?
[PDF Warning] https://worrydream.com/refs/Lockhart_2002_-_A_Mathematician%...
When I wrote " GA is considered a kooky, crackpotty sideshow..." I didn't mean I consider it to be..., I mean, it is the case that it is considered to be.... I guess I'm surprised if you haven't run into this? I'm not sure, but it's am impression I've gotten online for a long time. And if you read many of the older Hestenes-era writings you can't help but get it yourself.
I agree about the importance of alternative representations, but, people should be somewhat careful about which ones they're espousing. Sometimes people get quite enthusiastic about wedge products and then think what they're excited about is geometric algebra. Personally I would like to see wedge products taught alongside vector algebra and calculus. But I don't see a useful place to include the geometric product, except as more better way of stating things about actual Clifford algebras (quaternions and gamma matrices). I do suspect that there is a 'better' version of GA that is important than that, but I haven't seen it described.
I hear authors mention it sometimes. But, I don't see the examples or evidence.
Maybe I'm just not on the math departments enough.